| |
Accessory |
Description |
Add to Enquiry |
 |
Base Frame |
It is made up of M.S. and provides common base to motor and blower. It eliminates relative vibration and misalignment in between motor and blower. |
|
 |
Slide Rail |
Mild steel slide rail is used to adjust the tightness of the belt. It increases the smoothness in operation and helps in adjustment. |
|
 |
Suction Silencer |
It is fitted at the suction end of the blower.It reduces inlet air sound to reasonable level as per I S specifications. |
|
|
Discharge Silencer cum Interconnecting Pipe line |
It is fitted at the discharge end as an interconnecting pipeline.It reduces the outlet air sound as per IS specifications. |
|
|
Suction Filter |
It is fitted at the suction silencer and filters all the dust particles. (Up to 5 micron).Use of the suction filter results in the increased life of internal parts of the blower by preventing them from dust. |
|
 |
Motor Pulley |
Fitted at motor shaft. V-Groove motor pulley transmits maximum power without slippage loses |
|
 |
Blower Pulley |
Fitted at blower Shaft. By adjusting the size of blower pulley, it is easy to achieve different RPM with Fixed motor RPM. |
|
|
V-Belt |
Fitted over motor pulley and blower pulley. V-Belt transmits maximum power without slippage.It's heat resistant, oil and dust protection properties results in the increased life |
|
|
V-Belt Guard |
It is fitted on pulley side base frame. Protects from accidents and covers the rotating belt |
|
 |
Pressure Gauge With Isolation Valve and Syphon |
Fitted on the interconnecting pipeline and indicates the pressure in pipeline. Isolation valve makes the gauge durable.Syphon arrangement of the gauge pipe damps the sudden effect/release of the pressure |
|
 |
Safety Valve |
Fitted on interconnecting pipeline. It release the extra increased pressure automatically |
|
 |
Non Return Valve |
Fitted at the end of interconnecting pipeline. It prevents the reverse flow/thrust in the anti flow direction. |
|
 |
Anti Vibration Pad |
Fitted in between base frame and foundation. It absorbs all kind of vibration up to reasonable level as per I S specifications |
|
 |
Expansion Joint |
Fitted after NRV. It plays significant role in preventing the pipe misalignment .It also adjusts thermal expansion |
|
|
Foundation Bolts |
Fitted to clamp base frame with foundation. Prevents vibration and movement of the base frame. |
|
 |
Gasket |
Used at the suction and discharge end of the blower. It helps in preventing leakage. |
|
 |
Filter Choking Device |
Fitted in between filter and silencer. It indicates the dust concentration in the filter. |
|
